nice shop bike

nice shop bike
Boulder Bicycle Lugged

Thursday, June 30, 2011

Berthoud Ahead Decaleurs now in stock!


After much waiting, Berthoud decaleurs for threadless stems are here! They are now available from our on-line store. The official threadless decaleurs come in two "lengths". Shown below, is a ruler showing measuring the 70 length model. As you can see, from center of the tube widget that holds the decaleur against the stem to the center of the multi part tube that mounts to the bag, the length is 70mm - surprise!


The other length that is offered is 50 version which is - you guessed it, 50mm for that dimension! For bikes where the declaleur will be pointed straight ahead, go for the shortest. Now on some installations, you actually need to get the decaleur to reach much further down. For such cases, we can supply the decaleur with the extension part that is usually used with quill type stems. For those, the measurements are roughly 83mm or 113mm.

Now, we've sold lots of folks Berthoud decaleurs, and on occasion folks have issues with the decaleur rotating. You need to get the bolts really tight to lock in the rotation. And we would suggest that you carry a 4mm allen to tighten it if it does come loose. We do make our own anti-rotation widget for these. But the new wave of Berthoud decaleurs are slightly different dimensionally and we are currently re-designing them. But we've talked to many folks who have been extremely pleased with the Berthoud design as it is, so it seems our anti-rotation modification while nice and helpful is both costly and in many cases unnecessary.



Currently, the Berthoud decaleur is probably the most reliable in terms of the bag not jumping compared with any other design including our own Rene Herse. The Berthoud design is a bit more cumbersome to remove, but we've been using it on the shop Boulder Bicycles that we ride, and we're very pleased.



Mike Kone in Boulder CO USA





Thursday, June 16, 2011

Regina Track Chain Madness June 16 2010


New Old Stock Regina Fun!


In addition to rando stuff we love vintage items and track stuff too! We've been selling Regina Oro Track chains (1/8") at a pretty steady clip over the years for $69 each. We went to hit our source for some more recently, and they offered us the entire lot! It turns out that these track chains we've been getting are correct Regina oro (gold) track chains from around 1980 that were "bulk packaged". They were originally cut to a length for BMX bikes and include a master link. So our supplier was splicing in a bit more chain to get them to track length, and selling them to us. We sold lots and lots of these, with many folks buying multiples over time.

So what we've done is taken the BMX length (again, this is true Regina oro track chain that bmx folks wanted in on apparently) and are supplying additional links in order to get them to proper length. We're actually including more than enough - about 116 links or so. Thats long enough for a bike with a deraillieur! But so what, can't hurt to have a bit extra. So to use these, you will need to know how to wield a chain tool, but you needed that in any case. The chains even have a master link - but that is in the main length and you may choose to mess with it or just ignore it and use your chain tool and treat it like a typical chain (which it really is).





Now, we noticed that some chains have some discoloration. That is typical of most fresh Regina stuff, but some chains have more of it than others. The photo above shows the minimal quality chain you should expect to receive. You may get one that looks snazzier (more uniform gold), but if the above chain looks good enough, you are certain to be pleased. Afterall, these are chains and typically get a bit dirty.


We wiped down the above chain a bit and the photo below shows the chain after a wipe with alcohol. What shows up in the upper photo as looking like corrosion is really gook. Chains that had any notable corrosion are set aside and not sold in this batch. Again, your chain or chains may be snazzier, or maybe not, but they should be at least as nice as what you see. Afterall, we aim for happy customers. And of course, if you are not happy, just let us know and we'll do what it takes to make you happy (in reference to the track chains only, we can't provide global happiness. That would put all the shrinks out if biz).


The pricing is what is really cool here. Instead of $69 for one on ebay, for a limited time these are only $23 for one or $76 for 4, plus shipping! Now once we sell of a small quantity, we'll be bumping the price up as the price on these is silly low. So act soon and take advantage of this special deal. If you are a fix gear lover, this is a great opportunity!





Mike Kone in Boulder CO USA